Groover's Principles of Modern Manufacturing: Materials, Processes, and Systems, SI Version, Global Edition
Námskeið
- VÉL403G Framleiðsluferli.
Ensk lýsing:
Groover's Principles of Modern Manufacturing, is designed for a first course or two-course sequence in Manufacturing at the junior level in Mechanical, Industrial, and Manufacturing Engineering curricula. As in preceding editions, the author's objective is to provide a treatment of manufacturing that is modern and quantitative. The book's modern approach is based on balanced coverage of the basic engineering materials, the inclusion of recently developed manufacturing processes and comprehensive coverage of electronics manufacturing technologies.
Lýsing:
Groover's Principles of Modern Manufacturing, is designed for a first course or two-course sequence in Manufacturing at the junior level in Mechanical, Industrial, and Manufacturing Engineering curricula. As in preceding editions, the author's objective is to provide a treatment of manufacturing that is modern and quantitative. The book's modern approach is based on balanced coverage of the basic engineering materials, the inclusion of recently developed manufacturing processes and comprehensive coverage of electronics manufacturing technologies.
Annað
- Höfundur: Mikell P. Groover
- Útgáfa:6
- Útgáfudagur: 2016-09-19
- Hægt að prenta út 10 bls.
- Hægt að afrita 2 bls.
- Format:ePub
- ISBN 13: 9781119249092
- Print ISBN: 9781119249122
- ISBN 10: 1119249090
Efnisyfirlit
- Cover
- Title Page
- Preface
- Approach
- Organization of the Book
- New to this Edition
- Support Material for Instructors
- Acknowledgements
- 1 Introduction and Overview of Manufacturing
- 1.1 What is Manufacturing?
- 1.2 Materials in Manufacturing
- 1.3 Manufacturing Processes
- 1.4 Production Systems
- 1.5 Manufacturing Economics
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- PART I: ENGINEERING MATERIALS AND PRODUCT ATTRIBUTES
- 2 The Nature of Materials
- 2.1 Atomic Structure and the Elements
- 2.2 Bonding between Atoms and Molecules
- 2.3 Crystalline Structures
- 2.4 Noncrystalline (Amorphous) Structures
- 2.5 Engineering Materials
- REFERENCES
- REVIEW QUESTIONS
- 3 Mechanical Properties of Materials
- 3.1 Stress–Strain Relationships
- 3.2 Hardness
- 3.3 Effect of Temperature on Properties
- 3.4 Fluid Properties
- 3.5 Viscoelastic Behavior of Polymers
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 4 Physical Properties of Materials
- 4.1 Volumetric and Melting Properties
- 4.2 Thermal Properties
- 4.3 Mass Diffusion
- 4.4 Electrical Properties
- 4.5 Electrochemical Processes
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 5 Engineering Materials
- 5.1 Metals and Their Alloys
- 5.2 Ceramics
- 5.3 Polymers
- 5.4 Composite Materials
- REFERENCES
- REVIEW QUESTIONS
- 6 Dimensions, Surfaces, and Their Measurement
- 6.1 Dimensions, Tolerances, and Related Attributes
- 6.2 Conventional Measuring Instruments and Gages
- 6.3 Surfaces
- 6.4 Measurement of Surfaces
- 6.5 Effect of Manufacturing Processes
- REFERENCES
- REVIEW QUESTIONS
- 2 The Nature of Materials
- 7 Fundamentals of Metal Casting
- 7.1 Overview of Casting Technology
- 7.2 Heating and Pouring
- 7.3 Solidification and Cooling
- REFERENCES
- REVIEW Questions
- PROBLEMS
- 8 Metal Casting Processes
- 8.1 Sand Casting
- 8.2 Other Expendable-Mold Casting Processes
- 8.3 Permanent-Mold Casting Processes
- 8.4 Foundry Practice
- 8.5 Casting Quality
- 8.6 Castability and Casting Metals
- 8.7 Product Design Considerations
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 9 Glassworking
- 9.1 Raw Materials Preparation and Melting
- 9.2 Shaping Processes in Glassworking
- 9.3 Heat Treatment and Finishing
- 9.4 Product Design Considerations
- REFERENCES
- REVIEW QUESTIONS
- 10 Shaping Processes for Plastics
- 10.1 Properties of Polymer Melts
- 10.2 Extrusion
- 10.3 Production of Sheet and Film
- 10.4 Fiber and Filament Production (Spinning)
- 10.5 Coating Processes
- 10.6 Injection Molding
- 10.7 Compression and Transfer Molding
- 10.8 Blow Molding and Rotational Molding
- 10.9 Thermoforming
- 10.10 Casting
- 10.11 Polymer Foam Processing and Forming
- 10.12 Product Design Considerations
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 11 Processing of Polymer Matrix Composites and Rubber
- 11.1 Overview of PMC Processing
- 11.2 Open-Mold Processes
- 11.3 Closed-Mold Processes
- 11.4 Other PMC Shaping Processes
- 11.5 Rubber Processing and Shaping
- 11.6 Manufacture of Tires and Other Rubber Products
- REFERENCES
- REVIEW QUESTIONS
- 12 Powder Metallurgy
- 12.1 Characterization of Engineering Powders
- 12.2 Production of Metallic Powders
- 12.3 Conventional Pressing and Sintering
- 12.4 Alternative Pressing and Sintering Techniques
- 12.5 Materials and Products for Powder Metallurgy
- 12.6 Design Considerations in Powder Metallurgy
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 13 Processing of Ceramics and Cermets
- 13.1 Processing of Traditional Ceramics
- 13.2 Processing of New Ceramics
- 13.3 Processing of Cermets
- 13.4 Product Design Considerations
- REFERENCES
- REVIEW QUESTIONS
- 14 Fundamentals of Metal Forming
- 14.1 Overview of Metal Forming
- 14.2 Material Behavior in Metal Forming
- 14.3 Temperature in Metal Forming
- 14.4 Strain Rate Sensitivity
- 14.5 Friction and Lubrication in Metal Forming
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 15 Bulk Deformation Processes in Metal Working
- 15.1 Rolling
- 15.2 Forging
- 15.3 Extrusion
- 15.4 Wire and Bar Drawing
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 16 Sheet Metalworking
- 16.1 Cutting Operations
- 16.2 Bending Operations
- 16.3 Drawing
- 16.4 Dies and Presses for Sheet Metal Processes
- 16.5 Other Sheet-Metal-Forming Operations
- 16.6 Sheet Metal Operations Not Performed on Presses
- 16.7 Bending of Tube Stock
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 17 Theory of Metal Machining
- 17.1 Overview of Machining Technology
- 17.2 Theory of Chip Formation in Metal Machining
- 17.3 Force Relationships and the Merchant Equation
- 17.4 Power and Energy Relationships in Machining
- 17.5 Cutting Temperature
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 18 Machining Operations and Machine Tools
- 18.1 Machining and Part Geometry
- 18.2 Turning and Related Operations
- 18.3 Drilling and Related Operations
- 18.4 Milling
- 18.5 Machining Centers and Turning Centers
- 18.6 Other Machining Operations
- 18.7 Machining Operations for Special Geometries
- 18.8 High-Speed Machining
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 19 Cutting-Tool Technology
- 19.1 Tool Life
- 19.2 Tool Materials
- 19.3 Tool Geometry
- 19.4 Cutting Fluids
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 20 Economic and Product Design Considerations in Machining
- 20.1 Machinability
- 20.2 Tolerances and Surface Finish
- 20.3 Machining Economics
- 20.4 Product Design Considerations in Machining
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 21 Grinding and Other Abrasive Processes
- 21.1 Grinding
- 21.2 Related Abrasive Processes
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 22 Nontraditional Machining and Thermal Cutting Processes
- 22.1 Mechanical Energy Processes
- 22.2 Electrochemical Machining Processes
- 22.3 Thermal Energy Processes
- 22.4 Chemical Machining
- 22.5 Application Considerations
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 23 Heat Treatment of Metals
- 23.1 Annealing
- 23.2 Martensite Formation in Steel
- 23.3 Precipitation Hardening
- 23.4 Surface Hardening
- 23.5 Heat Treatment Methods and Facilities
- REFERENCES
- REVIEW QUESTIONS
- 24 Surface Processing Operations
- 24.1 Industrial Cleaning Processes
- 24.2 Diffusion and Ion Implantation
- 24.3 Plating and Related Processes
- 24.4 Conversion Coating
- 24.5 Vapor Deposition Processes
- 24.6 Organic Coatings
- 24.7 Porcelain Enameling and Other Ceramic Coatings
- 24.8 Thermal and Mechanical Coating Processes
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 25 Fundamentals of Welding
- 25.1 Overview of Welding Technology
- 25.2 The Weld Joint
- 25.3 Physics of Welding
- 25.4 Features of a Fusion-Welded Joint
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 26 Welding Processes
- 26.1 Arc Welding
- 26.2 Resistance Welding
- 26.3 Oxyfuel Gas Welding
- 26.4 Other Fusion-Welding Processes
- 26.5 Solid-State Welding
- 26.6 Weld Quality
- 26.7 Weldability
- 26.8 Design Considerations in Welding
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 27 Brazing, Soldering, and Adhesive Bonding
- 27.1 Brazing
- 27.2 Soldering
- 27.3 Adhesive Bonding
- REFERENCES
- REVIEW QUESTIONS
- 28 Mechanical Assembly
- 28.1 Threaded Fasteners
- 28.2 Rivets and Eyelets
- 28.3 Assembly Methods Based on Interference Fits
- 28.4 Other Mechanical Fastening Methods
- 28.5 Molding Inserts and Integral Fasteners
- 28.6 Design for Assembly
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 29 Rapid Prototyping and Additive Manufacturing
- 29.1 Fundamentals of Rapid Prototyping and Additive Manufacturing
- 29.2 Additive Manufacturing Processes
- 29.3 Cycle Time and Cost Analysis
- 29.4 Additive Manufacturing Applications
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 30 Processing of Integrated Circuits
- 30.1 Overview of IC Processing
- 30.2 Silicon Processing
- 30.3 Lithography
- 30.4 Layer Processes Used in IC Fabrication
- 30.5 Integrating the Fabrication Steps
- 30.6 IC Packaging
- 30.7 Yields in IC Processing
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 31 Electronics Assembly and Packaging
- 31.1 Electronics Packaging
- 31.2 Printed Circuit Boards
- 31.3 Printed Circuit Board Assembly
- 31.4 Electrical Connector Technology
- REFERENCES
- REVIEW QUESTIONS
- 32 Microfabrication Technologies
- 32.1 Microsystem Products
- 32.2 Microfabrication Processes
- REFERENCES
- REVIEW QUESTIONS
- 33 Nanofabrication Technologies
- 33.1 Nanotechnology Products and Applications
- 33.2 Introduction to Nanoscience
- 33.3 Nanofabrication Processes
- REFERENCES
- REVIEW QUESTIONS
- 34 Automation Technologies for Manufacturing Systems
- 34.1 Automation Fundamentals
- 34.2 Hardware for Automation
- 34.3 Computer Numerical Control
- 34.4 Industrial Robotics
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 35 Integrated Manufacturing Systems
- 35.1 Material Handling
- 35.2 Fundamentals of Production Lines
- 35.3 Manual Assembly Lines
- 35.4 Automated Production Lines
- 35.5 Cellular Manufacturing
- 35.6 Flexible Manufacturing Systems
- 35.7 Computer-Integrated Manufacturing
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
- 36 Process Planning and Production Control
- 36.1 Process Planning
- 36.2 Other Manufacturing Engineering Functions
- 36.3 Production Planning and Control
- 36.4 Just-In-Time Delivery Systems
- 36.5 Lean Production
- REFERENCES
- REVIEW QUESTIONS
- 37 Quality Control and Inspection
- 37.1 Product Quality
- 37.2 Process Capability and Tolerances
- 37.3 Statistical Process Control
- 37.4 Quality Programs in Manufacturing
- 37.5 Inspection Principles
- 37.6 Modern Inspection Technologies
- REFERENCES
- REVIEW QUESTIONS
- PROBLEMS
UM RAFBÆKUR Á HEIMKAUP.IS
Bókahillan þín er þitt svæði og þar eru bækurnar þínar geymdar. Þú kemst í bókahilluna þína hvar og hvenær sem er í tölvu eða snjalltæki. Einfalt og þægilegt!Rafbók til eignar
Rafbók til eignar þarf að hlaða niður á þau tæki sem þú vilt nota innan eins árs frá því bókin er keypt.
Þú kemst í bækurnar hvar sem er
Þú getur nálgast allar raf(skóla)bækurnar þínar á einu augabragði, hvar og hvenær sem er í bókahillunni þinni. Engin taska, enginn kyndill og ekkert vesen (hvað þá yfirvigt).
Auðvelt að fletta og leita
Þú getur flakkað milli síðna og kafla eins og þér hentar best og farið beint í ákveðna kafla úr efnisyfirlitinu. Í leitinni finnur þú orð, kafla eða síður í einum smelli.
Glósur og yfirstrikanir
Þú getur auðkennt textabrot með mismunandi litum og skrifað glósur að vild í rafbókina. Þú getur jafnvel séð glósur og yfirstrikanir hjá bekkjarsystkinum og kennara ef þeir leyfa það. Allt á einum stað.
Hvað viltu sjá? / Þú ræður hvernig síðan lítur út
Þú lagar síðuna að þínum þörfum. Stækkaðu eða minnkaðu myndir og texta með multi-level zoom til að sjá síðuna eins og þér hentar best í þínu námi.
Fleiri góðir kostir
- Þú getur prentað síður úr bókinni (innan þeirra marka sem útgefandinn setur)
- Möguleiki á tengingu við annað stafrænt og gagnvirkt efni, svo sem myndbönd eða spurningar úr efninu
- Auðvelt að afrita og líma efni/texta fyrir t.d. heimaverkefni eða ritgerðir
- Styður tækni sem hjálpar nemendum með sjón- eða heyrnarskerðingu
- Gerð : 208
- Höfundur : 6240
- Útgáfuár : 2016
- Leyfi : 380