Mechanics of Materials, Enhanced, SI Edition
10.890 kr.
Námskeið
- VÉL202G Burðarþolsfræði
- T-106-BURD Stöðu og burðarþolsfræði
Lýsing:
Develop a thorough understanding of the mechanics of materials an area essential for success in mechanical, civil and structural engineering with the analytical approach and problemsolving emphasis found in Goodno / Gere's leading MECHANICS OF MATERIALS, Enhanced, SI, 9th Edition. This book focuses on the analysis and design of structural members subject to tension, compression, torsion and bending.
Annað
- Höfundar: Barry J. Goodno, James M. Gere
- Útgáfa:9
- Útgáfudagur: 11/2019
- Hægt að prenta út 2 bls.
- Hægt að afrita 2 bls.
- Format:Page Fidelity
- ISBN 13: 9780357377925
- Print ISBN: 9780357377857
- ISBN 10: 0357377923
Efnisyfirlit
- Contents
- About the Authors
- Preface
- Preface to the SI Edition
- Digital Resources
- Symbols
- Chapter 1: Tension, Compression, and Shear
- 1.1 Introduction to Mechanics of Materials
- 1.2 Problem-Solving Approach
- 1.3 Statics Review
- 1.4 Normal Stress and Strain
- 1.5 Mechanical Properties of Materials
- 1.6 Elasticity, Plasticity, and Creep
- 1.7 Linear Elasticity, Hooke's Law, and Poisson's Ratio
- 1.8 Shear Stress and Strain
- 1.9 Allowable Stresses and Allowable Loads
- 1.10 Design For Axial Loads and Direct Shear
- Chapter Summary and Review
- Problems Chapter 1
- Some Additional Review Problems: Chapter 1
- Chapter 2: Axially Loaded Members
- 2.1 Introduction
- 2.2 Changes in Lengths of Axially Loaded Members
- 2.3 Changes in Lengths under Nonuniform Conditions
- 2.4 Statically Indeterminate Structures
- 2.5 Thermal Effects, Misfits, and Prestrains
- 2.6 Stresses on Inclined Sections
- 2.7 Strain Energy
- 2.8 Impact Loading
- 2.9 Repeated Loading and Fatigue
- 2.10 Stress Concentrations
- 2.11 Nonlinear Behavior
- 2.12 Elastoplastic Analysis
- Chapter Summary and Review
- Problems Chapter 2
- Some Additional Review Problems: Chapter 2
- Chapter 3: Torsion
- 3.1 Introduction
- 3.2 Torsional Deformations of a Circular Bar
- 3.3 Circular Bars of Linearly Elastic Materials
- 3.4 Nonuniform Torsion
- 3.5 Stresses and Strains in Pure Shear
- 3.6 Relationship Between Moduli of Elasticity E and G
- 3.7 Transmission of Power by Circular Shafts
- 3.8 Statically Indeterminate Torsional Members
- 3.9 Strain Energy in Torsion and Pure Shear
- 3.10 Torsion of Noncircular Prismatic Shafts
- 3.11 Thin-Walled Tubes
- 3.12 Stress Concentrations in Torsion
- Chapter Summary and Review
- Problems Chapter 3
- Some Additional Review Problems: Chapter 3
- Chapter 4: Shear Forces and Bending Moments
- 4.1 Introduction
- 4.2 Types of Beams, Loads, and Reactions
- 4.3 Shear Forces and Bending Moments
- 4.4 Relationships Among Loads, Shear Forces, and Bending Moments
- 4.5 Shear-Force and Bending-Moment Diagrams
- Chapter Summary and Review
- Problems Chapter 4
- Some Additional Review Problems: Chapter 4
- Chapter 5: Stresses in Beams (Basic Topics)
- 5.1 Introduction
- 5.2 Pure Bending and Nonuniform Bending
- 5.3 Curvature of a Beam
- 5.4 Longitudinal Strains in Beams
- 5.5 Normal Stresses in Beams (Linearly Elastic Materials)
- 5.6 Design of Beams for Bending Stresses
- 5.7 Nonprismatic Beams
- 5.8 Shear Stresses in Beams of Rectangular Cross Section
- 5.9 Shear Stresses in Beams of Circular Cross Section
- 5.10 Shear Stresses in the Webs of Beams with Flanges
- 5.11 Built-Up Beams and Shear Flow
- 5.12 Beams with Axial Loads
- 5.13 Stress Concentrations in Bending
- Chapter Summary and Review
- Problems Chapter 5
- Some Additional Review Problems: Chapter 5
- Chapter 6: Stresses in Beams (Advanced Topics)
- 6.1 Introduction
- 6.2 Composite Beams
- 6.3 Transformed-Section Method
- 6.4 Doubly Symmetric Beams with Inclined Loads
- 6.5 Bending of Unsymmetric Beams
- 6.6 The Shear-Center Concept
- 6.7 Shear Stresses in Beams of Thin-Walled Open Cross Sections
- 6.8 Shear Stresses in Wide-Flange Beams
- 6.9 Shear Centers of Thin-Walled Open Sections
- 6.10 Elastoplastic Bending
- Chapter Summary and Review
- Problems Chapter 6
- Some Additional Review Problems: Chapter 6
- Chapter 7: Analysis of Stress and Strain
- 7.1 Introduction
- 7.2 Plane Stress
- 7.3 Principal Stresses and Maximum Shear Stresses
- 7.4 Mohr's Circle for Plane Stress
- 7.5 Hooke's Law for Plane Stress
- 7.6 Triaxial Stress
- 7.7 Plane Strain
- Chapter Summary and Review
- Problems Chapter 7
- Some Additional Review Problems: Chapter 7
- Chapter 8: Applications of Plane Stress (Pressure Vessels, Beams, and Combined Loadings)
- 8.1 Introduction
- 8.2 Spherical Pressure Vessels
- 8.3 Cylindrical Pressure Vessels
- 8.4 Maximum Stresses in Beams
- 8.5 Combined Loadings
- Chapter Summary and Review
- Problems Chapter 8
- Some Additional Review Problems: Chapter 8
- Chapter 9: Deflections of Beams
- 9.1 Introduction
- 9.2 Differential Equations of the Deflection Curve
- 9.3 Deflections by Integration of the Bending-Moment Equation
- 9.4 Deflections by Integration of the Shear-Force and Load Equations
- 9.5 Method of Superposition
- 9.6 Moment-Area Method
- 9.7 Nonprismatic Beams
- 9.8 Strain Energy of Bending
- 9.9 Castigliano's Theorem
- 9.10 Deflections Produced by Impact
- 9.11 Temperature Effects
- Chapter Summary and Review
- Problems Chapter 9
- Some Additional Review Problems: Chapter 9
- Chapter 10: Statically Indeterminate Beams
- 10.1 Introduction
- 10.2 Types of Statically Indeterminate Beams
- 10.3 Analysis by the Differential Equations of the Deflection Curve
- 10.4 Method of Superposition
- 10.5 Temperature Effects
- 10.6 Longitudinal Displacements at the Ends of a Beam
- Chapter Summary and Review
- Problems Chapter 10
- Some Additional Review Problems: Chapter 10
- Chapter 11: Columns
- 11.1 Introduction
- 11.2 Buckling and Stability
- 11.3 Columns with Pinned Ends
- 11.4 Columns with Other Support Conditions
- 11.5 Columns with Eccentric Axial Loads
- 11.6 The Secant Formula for Columns
- 11.7 Elastic and Inelastic Column Behavior
- 11.8 Inelastic Buckling
- Chapter Summary and Review
- Problems Chapter 11
- Some Additional Review Problems: Chapter 11
- References and Historical Notes
- Appendix A: Systems of Units
- Appendix B: Problem Solving
- Appendix C: Mathematical Formulas
- Appendix D: Review of Centroids and Moments of Inertia
- Appendix E: Properties of Plane Areas
- Appendix F: Properties of Structural-Steel Shapes
- Appendix G: Properties of Structural Timber
- Appendix H: Deflections and Slopes of Beams
- Appendix I: Properties of Materials
- Answers to Problems
- Index
UM RAFBÆKUR Á HEIMKAUP.IS
Bókahillan þín er þitt svæði og þar eru bækurnar þínar geymdar. Þú kemst í bókahilluna þína hvar og hvenær sem er í tölvu eða snjalltæki. Einfalt og þægilegt!Rafbók til eignar
Rafbók til eignar þarf að hlaða niður á þau tæki sem þú vilt nota innan eins árs frá því bókin er keypt.
Þú kemst í bækurnar hvar sem er
Þú getur nálgast allar raf(skóla)bækurnar þínar á einu augabragði, hvar og hvenær sem er í bókahillunni þinni. Engin taska, enginn kyndill og ekkert vesen (hvað þá yfirvigt).
Auðvelt að fletta og leita
Þú getur flakkað milli síðna og kafla eins og þér hentar best og farið beint í ákveðna kafla úr efnisyfirlitinu. Í leitinni finnur þú orð, kafla eða síður í einum smelli.
Glósur og yfirstrikanir
Þú getur auðkennt textabrot með mismunandi litum og skrifað glósur að vild í rafbókina. Þú getur jafnvel séð glósur og yfirstrikanir hjá bekkjarsystkinum og kennara ef þeir leyfa það. Allt á einum stað.
Hvað viltu sjá? / Þú ræður hvernig síðan lítur út
Þú lagar síðuna að þínum þörfum. Stækkaðu eða minnkaðu myndir og texta með multi-level zoom til að sjá síðuna eins og þér hentar best í þínu námi.
Fleiri góðir kostir
- Þú getur prentað síður úr bókinni (innan þeirra marka sem útgefandinn setur)
- Möguleiki á tengingu við annað stafrænt og gagnvirkt efni, svo sem myndbönd eða spurningar úr efninu
- Auðvelt að afrita og líma efni/texta fyrir t.d. heimaverkefni eða ritgerðir
- Styður tækni sem hjálpar nemendum með sjón- eða heyrnarskerðingu
- Gerð : 208
- Höfundur : 5728
- Útgáfuár : 2017
- Leyfi : 379